Welder Kohler
| Powered by phpBay Pro |
kohler engine problem?
lincoln weldanpower 150 AC WELDER/GENERATOR.....A...cant identify eng model ...one cyl ./gas/150 amp weld/gen. B. eng runs fine ...burns a little oil except until last night /while applying load -eng.bogs & white smoke comes out of crnk case breather vent holes on side of eng ? only when striking ?burning an arc??rings?valves?white smoke bfom crnk case ?...pls any suggestions ...nearly finished welding ? Allmost not quite..........allways sumpin?
You may have a blown piston and you are burning crank case oil. White smoke should not be coming form the crankcase breather hose. That hose at the most should see small pressure from the crank case going back into the air cleaner assembly mixing with the fuel and air. It acts as an emissions solution. One way to test this is cover you exhaust while the engine is running. If more smoke comes out of the breather hose you definately have a blown piston. The engine bogs down because exhaust is getting pulled back into the air cleaner
Recently Purchased:
| Powered by phpBay Pro |