Inch Copper
| Powered by phpBay Pro |
capping a half inch copper pipe with a self soldering cap bought from home depot made by webb?
first time trying..very inexpierianced at soldering and plumbing.
1- Clean the end of the pipe with steel wool, fine grit sandpaper or emery cloth (fine grain).
2- At least 1" from the end and also wipe the inside of cap with the same.
3- Wipe off with a dry clean cloth.
4- Make absolutely sure there is not even a drop of water in the end of the pipe.
5- If you have some, wipe some solder flux on the end of the pipe and inside of the cap.
6- Set the cap in place and heat it with a torch till the solder runs and shut off the heat. (don't overheat the cap so that it turns bluish or you will have to redo the job and need another cap)
7- Wipe off the finished surface with a clean damp cloth and you're done.
Recently Purchased:
New Lot of 50 copper tees 3/8" inch pipe tee sweat, NIB LOT OF 1 - 3 X 2 INCH DWV COPPER WYE, NIB LOT OF 2 - 1 1/2 X 1 1/4 INCH COPPER X FEMALE ADAPTER, NIB LOT OF 5 - 1/2 X 3/4 INCH COPPER X FEMALE TEE, NIB LOT OF 10 - 1 X 3/4 INCH COPPER X MALE ADAPTER, NIB LOT OF 5 - 1 X 3/4 INCH COPPER X COPPER PRESSURE ELBOW, NIB LOT OF 1 - 4 INCH COPPER X MALE ADAPTER, NIB LOT OF 1 - 2 INCH COPPER X FEMALE PRESSURE UNION, NIB LOT OF 1 - 2 1/2 X 2 1/2 X 3/4 INCH COPPER X COPPER TEE, NIB LOT OF 1 - 2 INCH COPPER X MALE ELBOW, NIB LOT OF 10 - 1/2 X 1/4 INCH COPPER X COPPER TEE, NIB LOT OF 4 - 1 1/2 INCH COPPER DWV TY, NIB LOT OF 10 - 1/2 INCH COPPER X COPPER UNION, LOT OF 10 SOLID COPPER 8 D COMMON 2 1/2 INCH NAILS, VTCC — Cable Cutter up to 3/8 Inch Diameter Copper Wire, 1/2 inch Copper Female Adapter 603ADP, ca1940s copper printer's block engraving of WORLD GLOBE, 1 inch by 1½ inches, NIB LOT OF 5 - 1/2 X 1 INCH COPPER X FEMALE ADAPTER, NIB LOT OF 1 - 1 INCH COPPER X FEMALE TEE, NIB LOT OF 10 - 1 1/2 INCH COPPER X COPPER PRESSURE ELL, NIB LOT OF 25 - 1/2 INCH COPPER X FEMALE ELBOW, NIB LOT OF 10 -1/2 INCH COPPER X COPPER BALL VALVE, Copper tungsten sputter disk 3 inch diam x 1/4in thick, Vintage Printer's Wood & Copper block. Man on horseback. 3 & 1/4 inch diameter, NIB LOT OF 10 - 1/2 INCH COPPER X FEMALE TEE, 2 INCH COPPER SWEAT BRONZE GATE VALVE AMERICAN MADE USA SWT BRASS, Ridgid 1 Inch ProPress Jaw for Copper Catalog Number 76662, Ridgid 1 Inch ProPress Jaw for Copper Catalog Number 76662, NIB LOT OF 10 - 1 1/4 INCH COPPER X COPPER SLIP COUPLING, NIB LOT OF 10 - 3/4 INCH COPPER X FEMALE ELBOW, NIB LOT OF 5 - 1 INCH COPPER X FEMALE ELBOW, NIB LOT OF 6 - 1 INCH COPPER X MALE ELBOW, NIB LOT OF 1 - 4 INCH COPPER X COPPER PRESSURE COUP, NIB LOT OF 1 - 4 INCH COPPER X COPPER PRESSURE STREET ELBOW, NIB LOT OF 2 - 2 INCH COPPER DWV TY, NIB LOT OF 10 - 1/2 INCH FITTING X 1/2 MALE COPPER ADAPTER, NIB LOT OF 2 - 2 INCH X 1/2 COPPER X COPPER TEE, NIB LOT OF 2 - 2 INCH X 1/ 1/2 INCH DWV COPPER TY, NIB LOT OF 10 - 1/2 INCH COPPER FITTING X 1/4 INCH FEMALE FLUSH BUSHING, NIB LOT OF - 10 - 3/4 INCH COPPER FITTING X 1/2 INCH COPPER FLUSH BUSHING, NIB LOT OF 10 - 3/4 INCH FITTING X 3/4 COPPER MALE ADAPTER, NIB LOT OF 5 - 1 INCH X 1/2 X 1/2 COPPER X COPPER TEE, NIB LOT OF 2 - 2 INCH X 3/4 COPPER X COPPER TEE, NIB LOT OF 1 - 3 INCH COPPER X FEMALE ADAPTER, 4 INCH Copper Elbow NIBCO NEW, 85 Copper Nails 1.5 inch , NIB LOT OF 1 - 2 INCH COPPER X COPPER PRESSURE UNION, OLD FARM PRIMITIVE COPPER NOSE BULL NOSE RING 2 3/4 INCH MADE IN U S A , ALUMINUM SEAMLESS GUTTER MACHINE 6 inch ENGLERT LOTS OF TOOLS & SUPPLIES COPPER, Chantal 10-Inch Copper Fusion Fry Pan (70420001810),
| Powered by phpBay Pro |