Posted by admin on Tuesday, May 12, 2009 · Leave a Comment
HI FROM NEW ZEALAND.
I HAVE A LISTER-PETTER 16 KVA DIESEL 3 PHASE GENSET WITH SINGLE PHASE SOCKET @ 240 VAC. WITH A ITALIAN ELECTRONIC DIAGNOSTICS CONTROL PANEL WITH BREAKERS ETC.
WHEN RUNNING A "ESAB CADDY PROFESSIONAL 140" INVERTER WELDER @130 AMPS USING 4 MM HARDFACING RODS, ON FIRST STRIKE THE GENSET CUTS OUT AND DIE.
WHEN USING A COPPER WOUND TRANFORMER WELDER THE THING RUNS WELL BUT WILL NOT STOP WHEN I HIT THE KEY TO TURN OFF OR EMERGENCY STOP BUTTON.
NOTE; THIS IS A STANDBY GENSET IN THAT I JUST PLUGGED IN A WELDER, THE GENSET IS NOT A DEDICATED WELDING GENERATOR.....I USED OTHER DIESEL GENSETS PRIOR WITHOUT ANY PROBS.
WILL ANY1 HAVE ANY CLUES? REGARDING THIS.
THANKS IN ADVANCE.
Does the Esab welder have high frequency? If so the high freq. is feeding back into the generator and frying the electronics. You may need to have the generators repaired. The only way to prevent damage is to turn the high freq. off, or drive an earth ground as close to the welder as possible and you have to run a wire to your grounding clamp to this ground and the machine ground needs to go to this also. You have to get the high freq. out of the circuit as quick as possible.
miller air pack multiprocess welding generator, Bridge Rectifier Welding Machine / Generator Parts, Miller Big 40G Trailer-Mounted Welder Generator Welding Power Supply, UNILOC Ultrasonic Generator NEW 115/230 volt J103436,Cleaning,Mining,Bio,Weld, 1981 Hobart Bros DCC-353-P Portable Welding Generator , Thermal-Arc Scout Gas Welder Generator welding machine broken, for parts, Thermal-Arc Scout Gas Welder Generator welding machine broken, for parts, Thermal Arc Power Plus TA10 Welder Generator welding machine broken, for parts, Thermal Arc Power Plus TA10 Welder Generator welding machine broken, for parts, Thermal Arc Power Plus TA10 Welder Generator welding machine broken, for parts, Thermal Arc Scout Gas Welder Generator welding machine broken, for parts, Miller bobcat 225G Plus Gas Welder Generator welding machine broken, for parts, Thermal Arc Power Plus TA10 Welder Generator welding machine broken, for parts, Thermal Arc Power Plus TA 10 Welder Generator welding machine broken, for parts, Lincoln Ranger 250 Gas Welder Generator welding machine broken, for parts, Miller bobcat 225NT Gas Welder Generator welding machine broken, for parts, Miller bobcat 225NT Gas Welder Generator welding machine broken, for parts, Thermal Arc Power Plus Predator pro Generator welding machine broken, for parts, Miller bobcat 225G Plus Gas Welder Generator welding machine broken, for parts, Therman Arc Power plus TA10 Gas Welder Generator welding machine broken parts, Miller bobcat 225NT Gas Welder Generator welding machine broken, for parts, Miller bobcat 225G plus Gas Welder Generator welding machine broken, for parts, Branson Sonic Power Co. 1120P Welding Ultrasonic Generator Power Supply, MILLER AEAD-200LE CONSTANT CURRENT AC/DC ARC WELDING GENERATOR GAS POWERED, Miller Big Blue 402p -Diesel Welding Machine and Generator portable lincoln weld, EQUIPSOURCE LIFAN AXQ1-200 WELD PRO SERIES WELDER GENERATOR W/ WHEEL 3500W COMBO, Diesel Engine Army Generator Libby Welding MEP 005A , Thermal Arc TA 4/170H Welding Generator With Honda GX 270., Neon indicator light 120 Volts with resistor 21 , Electric Welder Welding Generator Arc welding Manual CD,
