Posted by admin on Monday, December 20, 2010 · Leave a Comment
The reducer to be used as downstream and upstream of level control valve and not pump.
#The only situations where It is advisable to use eccentric reducers are for slurry systems and where it is imperative to totally drain ALL condensed fluid. In both these situations, eccentric reducers can avoid small "dead spots" that exist behind concentric reducers. The only place I'd use flat side up eccentric reducers would be in pump suction line to avoid accumulation of gas pockets.
#The general recommendations, from a process point of view, to avoid adversely altering the CV characteristics and capacity are:
1. Avoid arrangements that can result in a nozzle-effect into the CV
2. Avoid closed-coupled inlet block valves reduced from line size
3. Avoid contorted manifolds to achieve accesibility, in particular in block-and-bypass arrangenments
4. Use straight-line pipe sections into and out of the CV as needed for the CV, as originally established by the control engineer. A ROT for reducers and expanders: 12
nominal pipe diameters (NPD) upstream and 5 downstream. For elbows on the same plane 18 NPD upstream, 30 NPD if not on the same plane.
Tri-Clover Sanitary Extended Eccentric Reducer fitting 1" to 3/4" 316L Stainless, Tri-Clover Sanitary Eccentric Reducer fitting 1x3/4" 316L Stainless Tri-Clamp, Tri-Clamp Sanitary Eccentric Reducer fitting 1x1/2" 316L Stainless Tri-Clover, Tri-Clover Sanitary Extended Eccentric Reducer fitting 1" to 3/4" 316L Stainless, NEW TA CHEN ECCENTRIC REDUCER 8" X 4" BUTT WELD 304/304LW STAINLESS SCH 10S, NEW YIH CHINA 6" X 3" ECCENTRIC BUTT WELD REDUCER 316/316L STAINLESS , WCB Waukesha 32090A3271 2" BW x 1.5" BW 316L SS BPE Sanitary ECCENTRIC REDUCER, Resistoflex PTFE Lined Eccentric Reducer 8" x 4", 3P PTFE Lined Eccentric Reducer 6" X 4", 3P PTFE Lined Eccentric Reducer 12" X 8", Resistoflex PTFE Lined Eccentric Reducer 4" X 3", Resistoflex PTFE Lined Eccentric Reducer 3" X 2", New Flowline 1.5x1" 316 Stainless Steel 40S Butt Weld Eccentric Reducer 56760, Austria Solef Agru PVDF-HP Eccentric Reducer 63/50 2”/1½” PN16, Austria Solef Agru PVDF-HP Eccentric Reducer 80x63? Lot of 2, Austria Asahi America Eccentric Reducer 4 x 3, 6'' X 5'' Eccentric Reducer Sch 40 Carbon Steel Buttweld End A-234 NEW, 6'' X 4'' Eccentric Reducer Sch 40 Carbon Steel Buttweld End A-234 NEW, 5'' X 4'' Eccentric Reducer Sch 40 Carbon Steel Buttweld End A-234 NEW, 4'' X 3'' Eccentric Reducer Sch 40 Carbon Steel Buttweld End A-234 NEW, 4'' X 2-1/2'' Eccentric Reducer Sch 40 Carbon Steel Buttweld End A-234 NEW, 3'' X 2-1/2'' Eccentric Reducer Sch 40 Carbon Steel Buttweld End A-234 NEW, 3'' X 2'' Eccentric Reducer Sch 40 Carbon Steel Buttweld End A-234 NEW, 2-1/2'' X 2'' Eccentric Reducer Sch 40 Carbon Steel Buttweld End A-234 NEW, 23127 Old-Stock, Markem 72120 Eccentric reducer, 5mm ID, 1/2" OD, 3" X 1-1/2" ECCENTRIC REDUCER FITTING SARAN LINED, 3" X 1" ECCENTRIC DOW SARAN LINED REDUCER, 25543 Dixon B3114MP-G400200 Eccentric Reducer 4"x2", 25544 Dixon B3114MP-G600400 Eccentric Reducer 6"x4", 22072 NEW Steing/JBT 408050011 Eccentric Reducer 1-1/2", 4" Std x 2" XH BW Eccentric Reducer Coupling, CARBON STEEL S40 2"X1" ECCENTRIC BLACK BUTTWELD REDUCER, WELDBEND Eccentric Reducer 6x3 Butt Weld STD WPB, E32WW-6L2.5x1.5 Eccentric Reducer 316, Stainless Sanitary Tri Clamp Eccentric Reducer L Pipe, New 12"X8" Flanged Fitting - Eccentric Reducer, E32WW-6L2.5x1.5 Eccentric Reducer 316, ECCENTRIC REDUCER BUTT WELD STD 11/2 X 1 304L STAINLESS STEEL 627WH, ECCENTRIC REDUCER BUTT WELD STD SCH 40 11/2 X 3/4 304L SS 623WH, ECCENTRIC REDUCER BUTT WELD S-10 6 X 3 304 SS 211WH, ECCENTRIC REDUCER BUTT WELD S-10 10 X 6 304SS 217WH, CHERRY BURRELL S32 2x1" ECCENTRIC REDUCER 316 SS 005B5, PVDF d110 x 90 HIGH PURITY ECCENTRIC REDUCER,
